Skip to content

Lesson 11: The Gettysburg Address

Lesson 11: The Gettysburg Address

Objective:

Students will learn the definition of sampling bias and will learn that random samples reduce bias when estimating a population parameter. They will gain practice collecting a random sample from a small population and estimating the population parameter.

Materials:

  1. Gettysburg Address handout (LMR_U3_L11_A)

  2. Sampling the Gettysburg Address handout (LMR_U3_L11_B)

  3. Dotplot titled “Mean Word Length, Self-Selected Sample, Size = 10” – on board or poster paper

  4. Gettysburg Address – Word Length Histogram file (LMR_U3_L11_C)

  5. Gettysburg Word Lengths handout (LMR_U3_L11_D)

  6. RStudio

  7. Projector for RStudio functions

  8. Dotplot titled “Mean Word Length, Random Sample, Size = 10” – on board or poster paper

    Note: This dotplot will be used again during Lesson 13, so the results need to be kept in some way (this can be either on poster paper or by simply taking a photo)

Vocabulary:

sampling bias

Essential Concepts:

Essential Concepts:

Statistics vary from sample to sample. If the typical value across many samples is equal to the population parameter, the statistic is "unbiased". Bias means that we tend to “miss the mark”. If we don't do random sampling, we can get biased estimates.

Lesson:

  1. Pose the following question to students: "What makes a speech truly great and memorable?" Have students discuss in their groups then invite the reporters to share out.

    Tell students that technical components, such as word length, matter. Ask: "What might be wrong with using long words in a speech?" Answers will vary. Ann Wylie, a writing trainer and PR specialist, explains the importance of word length and why we should care about it. In her blog post, she says that using long words in a speech should be avoided in order to increase readability/comprehension and make your ideas more clear/compelling.

    For example, she cites The Gettysburg Address that has 272 words, of which 174 of them have only one syllable. You can read her blog post here: https://www.wyliecomm.com/2021/11/what-is-word-length-and-why-should-you-care/

  2. Ann Wylie states that The Gettysburg Address is a "small wonder" in that it uses small words to express big ideas. Share facts about the Gettysburg Address:

    1. President Lincoln delivered the Gettysburg Address in November 1863.

    2. It is one of the most famous speeches in the United States.

    3. In it, Lincoln invoked the principles of human equality contained in the U.S. Constitution and Declaration of Independence.

  3. Read the Gettysburg Address aloud to the class OR have students read it aloud. The text of the speech can be found in the Gettysburg Address handout (LMR_U3_L11_A).

  4. Today we will use the Gettysburg Address to learn about different sampling techniques.

  5. Inform students that the Gettysburg Address contains 272 words. We can consider these 272 words to be our population because it includes all words in the entire speech. From the population, we can sample 10 words that we think represent the speech. It is ok for this step to be vague – students can come up with their own concept for what they think “representative” means in this case.

  6. Distribute the Sampling the Gettysburg Address handout (LMR_U3_L11_B), which includes the actual speech, as well as 2 sampling activities. For this part of the lesson, we will only be looking at Sampling Activity 1 on page 1 of the handout.

    Note: This activity was originally created by Allan Rossman and Beth Chance, and has been modified for the IDS curriculum.

  7. Inform students that they will get 30 seconds to select 10 words that they think are representative of all words in the speech.

    Note: It is important that students work fast so they are forced to choose based on first impressions and don't have time to reflect. Also, this activity tends to not work well if students are informed of the punch line (that random samples are unbiased) before they begin.

  8. At this point, explain to students that we are actually interested in answering a specific question:

    What is the typical word length in the Gettysburg Address?

  9. Next, students should record each circled word, as well as the number of letters each word has (this is the word length) in the table on the handout. Then, they should summarize the data in a dotplot and calculate the mean word length of the sample.

  10. On the board, create a class dotplot (may also be done on poster paper) titled “Mean Word Length, Self-Selected Sample, Size = 10.” Once all students have completed the first page of the Gettysburg Address handout (LMR_U3_L11_B), ask each student to record the mean word length of his or her sample on the class’s dotplot.

  11. When all students have recorded their sample statistics in the dotplot, conduct a class discussion based on the questions listed below.

    Note: You might need to do a reality check. Students will often make mistakes when adding the word lengths and when dividing. Be suspicious (and double-check) extreme values.

    1. What does each point on the plot represent? Answer: Each point represents one student's estimate of the mean length of all of words in the Gettysburg address.

    2. What is the typical value represented in the dotplot? Answers will vary by class. You should indicate the approximate location of the mean of the distribution (the balancing point), on the dotplot. Remind students that when we ask for the 'typical' value we mean the value in the center of the distribution.

    3. How much variability is there in the distribution? Answers will vary by class. One reasonable approach is for students to give the range (the difference between the largest and smallest values).

    4. What is the shape of the distribution? Answers will vary by class. Often, the shape is right-skewed, but it might not be for you. Note that outliers here will often be arithmetic errors, but not always.

  12. Next, display the histogram from the Gettysburg Address – Word Length Histogram file (LMR_U3_L11_C), which shows the distribution of word lengths for the entire population of words in the Gettysburg Address.

  13. Remind students that the population is the 272 words from the speech, and inform them that the mean word length of the population, or the population parameter, is 4.22. Using Think-Pair-Share, ask:

    1. How does the typical value of our class’s sample means compare to the actual population mean of 4.22? Answer: Almost always, the class’s typical mean will be higher (sometimes much higher) than 4.22. Some students will be close to 4.22. But point out that we are talking about the "trend" or typical outcome. The typical outcome is usually too high.
  14. Explain that our sampling plan was a self-selected sample, which often produces biased results. Sampling bias occurs when the resulting samples tend to produce results that are influenced in one particular direction.

  15. Refer back to the dotplot of sample means and point out how it is biased. Ask:

    1. Why was our original sampling procedure biased? Answer: When we look for 'representative' words, and do so quickly, our eyes are drawn by the larger, more unusual words, and we tend to overlook small words such as “in,” “a,” “we,” etc.
  16. Go back to the Gettysburg Address handout (LMR_U3_L11_B), and direct students to page 2 for Sampling Activity 2. Inform students that they will now do a sampling procedure that results in a better representation of the population of words in the speech.

  17. Explain that a random sample tends to produce unbiased sample results.

  18. Before students begin the activity, demonstrate how to generate 10 random numbers from a possible 272 using RStudio.

    > sample((1:272), size = 10, replace = FALSE)

  19. Each student should generate his or her own set of 10 random numbers. Once students have created their random numbers, distribute the Gettysburg Address Word Lengths handout (LMR_U3_L11_D).

  20. Explain that the table contains the word number, word, and length of each word in the Gettysburg Address. Demonstrate how to find a word that corresponds to one of the random numbers generated by RStudio, and explain that this word is now part of our random sample.

  21. Then, each student will complete the handout by creating a dotplot and calculating the mean of their random sample.

  22. On the board, near the first dotplot, create another class dotplot (may also be done on poster paper) titled “Mean Word Length, Random Sample, Size = 10.” Once all students have completed the second page of the Gettysburg Address handout (LMR_U3_L11_B), ask each student to record the mean word length of his or her random sample on the class’s dotplot.

    Note: As in step 9 from above, be sure to check arithmetic for outliers!

  23. When all students have recorded their sample statistics in the dotplot, conduct a class discussion based on the following questions:

    1. What does each point in the dotplot represent? Answer: Each dot represents one student's estimate of the mean word length. But this time, the estimates are based on a random sample of 10 words.

    2. What do you notice about the typical value in this distribution? Answers will vary by class. They should notice that the means of the random samples are fairly close to the population mean of 4.22. (Again, you might have to discard or correct outliers.)

    3. What shape does this distribution have? What does that tell us? Answer: Typically, the distribution of sample means for random samples will be symmetric and unimodal.

    4. What does this distribution tell us about the benefits of random samples? Answer: We can reduce bias by collecting random samples instead of self-selected samples.

    5. Why do we need sampling? Why can’t we just get the information from the actual population? Answer: It is usually impossible to include every person or object from a population. Even for the population of size 272 words in the Gettysburg Address, it would take a long time to calculate the word lengths of every single word.

  24. Conclusions and takeaways:

    1. It turns out that there are approximately 5.17•1017 different possible samples of 10 words from the Gettysburg Address.

    2. If we could determine the mean for each of these samples and produce a dotplot for all of these means, then the center of the dotplot would lie exactly at 4.22 and the shape of the dotplot is symmetric and unimodal.

    3. The resulting distribution of the means from all possible samples is called the sampling distribution for the sample mean (for samples of size 10 from this population).

    4. The above dotplot is an approximation to the actual sampling distribution.

Class Scribes:

One team of students will give a brief talk to discuss what they think the 3 most important topics of the day were.

Homework & Next Day

Students should write a reflection about why random sampling is better at reducing bias than other sampling procedures.

Lab 3C: Random Sampling

Complete Lab 3C prior to Lesson 12.